Sometimes, we need to print a report on a printed blank paper. Such as invoice, bill, credential, etc. With common reporting tools, we need to measure every data area with a ruler, and design the report according to the sizes. In a practical case, it may need to debug the report for many times. Therefore, it will be very complicated and frustrated. Moreover, if the paper format changes, developers have to design the report again. Preformatted paper printing is also called locating printing, which means to print desired content at a specific position on paper precisely. This function is widely used in report print. RAQ Report adopts base image depicting to realize the preformatted paper printing. With RAQ Report, developers can scan needed paper into an image, and set it as the background picture of the report. Next, drag the gridlines of the report to match the picture. Then, the report will be printed on the preformatted paper precisely. The screenshot of the report IDE is shown below: [IMG HREF="<a href="http://www.raqsoft.com/know-how/wp-content/uploads/2009/09/14.jpg" ]"="" rel="nofollow">http://www.raqsoft.com/know-how/wp-content/uploads/2009/09/14.jpg" Then, the print preview of the report is shown below: The screenshot of the report IDE is shown below: [IMG HREF="<a href="http://www.raqsoft.com/know-how/wp-content/uploads/2009/09/22.jpg" ]"="" rel="nofollow">http://www.raqsoft.com/know-how/wp-content/uploads/2009/09/22.jpg" For specifi operations, please refer to RAQ Report IDE — Help — User Tutorials — Junior Tutorial — 10.4 Preformatted Painting